|
Pressed Steel Tanks
'X-Tank" is our
standard range of pressed steel panel water storage tanks.
They consist of mass-produced pressed steel panels bolted
together in either a square or rectangular profile. STARTANK
panels are available in either 1000mm or 1220mm square modules,
which are hydraulically cold-pressed in one piece and embossed
with a distinctive star pressing at the centre to strengthen
the panels.
This is a simple and transportable solution
to the problem of bulk storage. They can be extended (please
click on 'capacity charts' to see the vast range of sizes
available), reduced in size or can have an internal partition
for periodic cleaning of each compartment, or alternatively,
store the liquid for different applications. They can be also
dismantled, transported and re-erected elsewhere if necessary.
Key Benefits of X-Tank's
Fabrication All materials used in construction and manufacturing
conforms to British Standard BS 4360 Grade 43A.
Flat steel plates are used to allow for external loads, for
example, installation/maintenance crew etc
Internal bracings and brackets are designed to ensure the
strength, rigidity and absolute uniformity of each tank.
All joints are completely leak proof.
All bolts used are High Tensile Grade 8.8 for rigid holding.
They are also zinc coated to protect against any rust forming.
Surface Finish
The standard finishes for cold water tanks
are as follows: Inside: Two coats of black bituminous paint.
Outside: One coat of zinc phosphate primer and one coat of
silver aluminium.
Alternatively, all materials can be
supplied in a hot dip galvanized finish.
Other finishes can be provided on request
Accessories
A standard square manhole with hinged lockable
cover and vent is provided.
"X-Tanks" are provided with suitable standard nozzles
either threaded or flanged depending on client’s requirements.
All the tanks generally provided with Inlet, Outlet, Overflow,
Drain Vent, Level Indicators and Internal & External Ladder.
Other accessories can be provided if required
Delivery
All the components are suitable sized for
easy loading and unloading by any standard transport vehicle.
The delivery of all the items to the site can be arranged
on request, depending on the location of the site.
Erection Teams are available to assemble the
tanks.
They can easily be erected on simple concrete foundations
or steel beams and on towers, rooftops, dwarf walls.
A simple system of marking enables various panel types to
be easily identifiable for erection purpose.
Installation manuals and drawings are provided to the client
on request.
Towers
These are designed to take any size of tanks
and are complete with a hooped cat-ladder.
They are also in suitable sizes for easy transportation
The standard finish for tower is with one coat of primer and
one coat of finish paint. Any other types of finish are available
on request.
ROUND TANKS
We also manufacture circular tanks with towers to suit
GO BACK
|
